ג'ינאן  דיבאייר  סביבתי  הגנה  חומרים  ושות',  בעמ
Exterior Wall ‎decoration Panel
Exterior Wall ‎decoration Panel
Exterior Wall ‎decoration Panel
Exterior Wall ‎decoration Panel
Exterior Wall ‎decoration Panel
Exterior Wall ‎decoration Panel
Exterior Wall ‎decoration Panel
Exterior Wall ‎decoration Panel

Exterior Wall ‎decoration Panel

Exterior wall ‎decoration panel is a kind of building material with high compression resistance, earthquake resistance, moisture resistance, low thermal conductivity, beautiful appearance, durability, energy saving, simple construction, environmental protection and other excellent performances. It can be widely used in building exterior wall decoration insulation and Indoor decorations.

שלח החקירה
תיאור
Products Description

 

 

Exterior wall ‎decoration panel is a new type of environmentally friendly building material that is very popular in recent years. It integrates metal wall insulation and decorative boards, metal embossed fireproof and heat insulation boards. The heat layer of the rigid high-density polyurethane insulation section with flame treatment, and the bottom surface is an aluminum foil protective layer. It has unique advantages in thermal insulation, waterproof and flame retardant, sound insulation and noise reduction, and has become a building material because of its green, environmentally friendly, beautiful and durable characteristics. The new favorite of merchants and homeowners.

Exterior wall ‎decoration panel are not only suitable for thermal insulation decoration of exterior walls of newly built brick-concrete structures, frame structures, steel structures, light-weight houses, etc., but also for decorative energy-saving renovation of existing buildings, as well as indoor and outdoor decoration. The "fighter" in the body building materials!

 

0

2

Advantages of exterior wall ‎decoration panel

 

 

The decorative effect can be compared with aluminum plate and stone curtain wall. Metal carved thermal insulation decorative board is an excellent decorative material with strong plasticity. The outer decorative surface can be processed into various colors according to customer requirements, and can achieve the effect of high-grade decorative materials such as aluminum-plastic boards, imitation wood, and imitation marble. 

Exterior wall ‎decoration panelare durable. Insensitive to wind and rain erosion and air pollution, with good self-cleaning ability, general dust pollution

Insensitive, with good self-cleaning ability, general dust pollution can be cleaned as new by washing with water. The walls that have been used for more than 20 years abroad are still relatively new.

The weight of the product is light (3.5㎏/㎡), only about one-tenth of other types of heat preservation methods, which minimizes the weight of the structure and facilitates transportation and installation.


1

2

3

6

Specification data

 

 

Product name

exterior wall ‎decoration panel

Size

3900*380*16mm/20mm(Length can be customized,MOQ>100Sqm)

Surface Textures and Appearance

Coarse brick veins;Wide or narrow brick veins;Standard brick veins;Standard brick veins;Bark veins;Stone veins;Plain veins

Materials

Polyurethane

Thickness

0.23mm-0.5mm

Unit weight

3.5kg/m³

Waterproof rate

415%

Wind resistance

8.0Kpa

Thermal conductivity

0.018W/m·k

Thermal Resistance

2.09㎡k/w

PU Density

40kg/m³

Compressive strength

52.7kpa

Characteristic

Good temp-keeping and heat insulation

Fine fireproof

Test by national quality inspection center for fireproof building material, all its index reach grade B1
According to your requirement(B1/B2)

Technical support

Incidental engineering drawings

Used

Municipal construction, apartment houses, office halls, villas, garden attractions, renovation of old buildings, guard booths, etc.

Installation

Convenient and flexible without the large- size lifting devices so that the construction period is limited with the lower comprehensive costs

Application

Polyurethane /PU foam sandwich panel(exterior/interior wall panel) can be used on any structural buildings ,brick wall, Steel structure, CEM

7

Installation

 

 

 

If we want to use exterior wall ‎decoration panel, we must first learn how to install them. Please take a look at the following articles for specific steps.
1. The main frame structure has been completed. Measure according to the design requirements and the actual situation on site, draw the layout plan, and process and manufacture the wall panels;
2. Before installation, the installation and construction plan or operation instruction should be compiled. The construction plan should be approved by the chief engineer of the group company, and the operation instruction should be approved by the technical director of the branch company;
3. Before the installation of the wall panels, the technical safety disclosure should be carried out step by step according to the construction plan or the operation instruction book, and the person who made the disclosure and the person to whom the disclosure should sign should sign on the disclosure record;
4. The metal carved wall panels have been transported into the construction site, stacked according to the number, and the wall panels are comprehensively checked and checked according to the design requirements and specification requirements, including quantity, specification, model, thickness, appearance quality, etc., which should meet the requirements. Wallboards that do not meet the requirements should be returned immediately, and unqualified products are strictly prohibited from being used in projects;
5. Find the elevation according to the design requirements, pop up the horizontal line on the inclined beam, accurately position the embedded parts according to the panel layout diagram of the wall panel manufacturer, find out the center line of the embedded part, and play the line;
6. Check the quantity and specifications of chemical anchor bolts, steel plates and angle steels, which should meet the requirements of continuous installation;
7. The mechanical equipment used for wall panel installation has entered the construction site, and has been inspected, repaired and maintained. It is in good condition, and the tools required for wall panel installation have been prepared.

 

5

4

About us

 

 

Jinan Dibaier Environmental Protection Materials Co., Ltd. Metal carved fire resistant decorative wall panels is still a new type of material, but in fact it has a long history of application in Japan. This material not only reduces the energy consumption during the use of the house, but also conforms to Japan's pursuit of green environmental protection. It also adapts to the characteristics of Japan's frequent earthquakes with its extremely light weight, replacing the heavy reinforced concrete, which greatly reduces the casualties of earthquakes. In the face of high energy consumption and high pollution in China's building materials market, some domestic building materials manufacturers have introduced metal carved board products into China, and introduced advanced technology and equipment from Japan to contribute to reducing energy consumption and environmental protection.

Metal carved panels are also known as metal embossed fire resistant decorative wall panelsand metal embossed fire and heat insulation integrated panels. characteristic. Compared with traditional exterior wall insulation materials, what new developments does it have?

Since the air layer between the exterior wall ‎decoration panel and the wall can adjust the humidity of the wall, it can effectively avoid the phenomenon of indoor mildew in the building wrapped by external heat preservation.


● It has a wide range of applications, and can be used in new and repaired buildings, public buildings, and private buildings, and does not require cumbersome pretreatment on the walls of buildings.

● Industrial automatic assembly line production, high product quality, stable performance, pass rate of over 99.9%.

● Dry installation, not affected by the weather, simple and convenient installation, short construction period

 

9

 

 

 

 

 

 

 

Product features

 

 

Reduce building energy consumption and save energy. Buildings with metal carved thermal insulation decorative panels can greatly improve the thermal insulation function of the wall. It can reduce energy consumption by more than 45% compared with buildings without metal carving insulation materials. In summer, it can greatly reduce the heat energy transmitted from the solar radiation exterior wall to the interior, thereby reducing the energy consumption of heating and air conditioning, protecting the main structure, and prolonging the life of the building.

 

Certificates

 


11

Shipping

 


12

Exhibition

 

10

FAQ

 

 

Q: What is the daily production capacity of metal carved panels?
A: More than 3000 square meters.

Q: Can I get free sample?
A: Sure. We supply free samples, you only need to pay the courier fee.

Q: Do you accept small orders?
A: Yes. If you are a builder, or small retailer or starting up business, we are definitely willing to grow up with you. And we are looking forward to co-work with you for a long term relationship.

Q: What is the general construction progress of metal carved panels in one day? Specifically, for example, how many square meters of exterior wall installation can 5 people complete in one day?
A: The advantage of exterior wall ‎decoration panel is that they are easy to install, fast, and not affected by weather and seasons. Under normal circumstances, 5 people can complete a project of 200-300 square meters a day.

Q: What's your MOQ:
A: Stock products: 1 m². Producing products: from 100 m².

Q: How long is your delivery time?
A: Standard products: 1~5 days. Customized products: 10-30 days.
We have 4 advanced production lines with daily capacity of 18,000 m², and thousand tons of raw materials in stock, to guarantee 100% on time delivery.

Q: How do you guarantee the quality?
A: Each product has strict testing procedures (from raw material selecting, manufacturing, quality checking, packing, and loading, etc.), and must be 100% quality checked before delivery.

Q: Can you do OEM?
A: Yes, we not only do OEM, but also do ODM. We can customize your logo onto product package.

Q: The aluminum foil of the metal engraved board sometimes burns, how to solve it?
A: The bottom layer of the exterior wall ‎decoration panel adopts a protective layer of aluminum foil for heat insulation and moisture resistance. The polyurethane core layer is a flame retardant material with a fire rating of B1. Even if the aluminum foil burns, polyurethane will insulate it from burning.

 

תגיות פופולריות: exterior wall ‎decoration panel, China, manufactures, suppliers, factory, price, for sale

Inquiry
goTop

(0/10)

clearall